ReadyMadeRC
UHF "WHISKER" MONOPOLE ANTENNA WITH RIGHT ANGLE SMA CONNECTOR
Note: In very cold temperatures the antenna will show slight bends after crashes. Once they warm up they will be straight again.,
The WhiskerPole UHF monopole antenna has been designed specifically for ...ReadyMadeRC
2.4GHZ SUPER CANNON RHCP HELICAL (2.3-2.4GHZ) IBCRAZY
This antenna from IBCrazy is circularly polarized with exceptional axial ratio and multipath rejection. It is extremely broadband: 100MHz @SWR < 1.5,
Works great in the 2.3-2.4GHz Band Use this antenna for ...ReadyMadeRC
SASQUATCH LABS - HOVERTHINGS FLIP SPORT - PNP
Product Features & Specs:, , Camera Equipment:, , Not recommended. It's a sport flyer, go fly it, have fun. :), Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,
Is it possible to improve on an already great design? ...ReadyMadeRC
SASQUATCH LABS / HOVERTHINGS FLIP FPV PRO
Product Features & Specs:, , Camera Equipment:, , Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,
Is it possible to improve on an already great design? ...ReadyMadeRC
SASQUATCH LABS / HOVERTHINGS FLIP SPORT PRO
Product Features & Specs:, , Camera Equipment:, , Not recommended. It's a sport flyer, go fly it, have fun. :), Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,
Is it possible to improve on an already great design? ...ReadyMadeRC
VAS WRAITH - BASIC KIT
| ATTENTION | According to |
| Range | 9 miles round trip |
| Flight time | 12-20 minutes |
| Top Speed | 75mph |
| Recommended motor | 1600-1800 kV, 150-250 Watts |
| Recommended Battery | 3S 4000 – 3S 5000 mAh Lipo (or 4S 3000 with 1400 kV motor) |
| Build time | 4-6 hours |
Wraith:, , Recommended prop size: 7”, What’s included in the kits:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
RMRC 6A POWER REGULATOR - 5 TO 6 VOLT (UBEC)
| Output | 5v or 6v(Selectable via jumper) 6A continuous, 8A burst |
| Input | 7v-25.5v (2-6S Lipo) |
| Size | 50x22x5 mm |
| Weight | 15g |
Specifications:,
High quality Ready Made RC, LLC 6A UBEC w/ Noise ...ReadyMadeRC
DJI PHANTOM 2 RTF, GOPRO HERO 3, AND FREE RMRC GIMBAL!
What's Included:, , Additional Notes:,
Everything you need to start making awesome videos! Start with ...ReadyMadeRC
CELLPRO (JST PA) POWERLAB 12" BALANCE PORT EXTENSION CABLE
,
The 12" extension cable plugs in between the Cellpro PowerLab ...ReadyMadeRC
PICO FPV COMBO (5.8 GHZ)
Package Includes:, , Camera Choices:, RMRC Pico V2 Camera (, Antenna Choices:, TrueRC Nano 5.8 RHCP Antenna, Altitude RC 5.8 Transmitter and optional True RC 5.8 Nano Antenna:,
This is a customizable combo for those looking for high ...ReadyMadeRC
FY-40A INERTIAL FLIGHT STABILIZATION SYSTEM
| Mode 1 | Deactivated Mode |
| Mode 2 | Stabilized Mode |
| Mode 3 | 3D Mode |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels |
| Working Voltage Range | DC 4.8V~5.5V (0.05A@5V, Powered by ESC) |
| Operating Temperature | -20°C ~ 50°C |
| Max Gyro Angular Velocity | 2000°/s |
| Weight&Dimensions | FY-40A 17g(45mm x 30mm x 9 mm) |
has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. Installation is very simple.By using your remote control, the unit can be turned on or off for the following functions:, Supported aircraft :, , Specifications:, ,
FY-40A ——In this mode, the FY-40Aauto stabilization is turned off. ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - CARBON FIBER
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...ReadyMadeRC
CC3D PROTECTIVE CASE - RIGHT ANGLE PINS - 3D SHELLZ
,
Introducing the perfect case for the CC3D control board with ...ReadyMadeRC
LED MAGICIAN V2.0 - CONTROLLER BOARD
,
The LED Magician - The Simplest Way to Add Blinking ...ReadyMadeRC
CXN - TALON UAV - FRONT FPV POD
,
Weights 149grams, this pod will not only provide a mount ...